Materials Testing

Materials Testing
Effective materials testing covers verification of material characteristics for application trials, detection of defects, analysis of failures, improvement of new materials or conducting basic research on the theoretical strength of materials. Our selected range of equipment allows you to perform these tests.

Top products in this category

Items 25 to 36 of 36 total
    AT 350
    A Motorized execution of model AT 250 with an automatic load application and motorized test head. Suitable for large parts and is usually employed for Jominy automated test process.
    BRE-AUT 100
    An automatic Brinell hardness tester for high volume testing works according to the standard Brinell loads and penetrators. Measurable maximum height 400mm, depth 200mm.
    BRE-AUT 300
    An automatic Brinell hardness tester for high volume testing works according to the standard Brinell loads and penetrators. Measurable maximum height 850mm, depth 250mm.
    STE/SD for Static and Impact Tests
    An applied force creates an indentation into the surface with a load determined by a calibrated expendable shear pin, which breaks at 1580 kgF (15.500N). The diameter of the resulting indentation is measured by means of a conventional Brinell Scope.
    AT 130D
    Simple, quick and precise measurement, the AT 130D clamping shield permits the measure of big and irregular pieces.
    NR3D
    Rockwell hardness tester with reading also in Brinell points (HB 30 standard scales and HB 10 / HB 5 for aluminium and light alloys).
    Twin X
    A Rockwell automatic hardness tester with direct read out in Rockwell and Superficial Rockwell scales.
    AT 250
    Measuring on components of large dimensions is possible and not influenced by deflections. The use of the clamping cap and the insensibility to deflection and vibration allows measuring even on large components.
    HTD4000
    The HTD4000 operates by a continuous depth of indentation measurement process while the load is steadily increased. The electronics calculates the hardness based on the displacement, depth, and force applied.
    HTD1500
    The HTD1500 operates by a continuous depth of indentation measurement process while the load is steadily increased. The electronics calculates the hardness based on the displacement, depth, and force applied.
    Antares
    Antares is the new ERNST 20X light microscope for BRINELL reading. 6 mm long scale - 0.05 mm graduations. Suitable for the checking of mechanical components.
    E-Brio 2
    The Brinell test is of basic importance in many areas of quality control, but often inaccurate readings and long test cycles have a negative impact on productivity. e-brio² is equipped with a new lighting system and new algorithm for indentation edge detection, able to read reliably and accurately on every material and surface, even on rough ones.
Items 25 to 36 of 36 total

Sign up to our newsletter

Keep up to date with company news, product launches and industry news.

Sign up