STE/SD for Static and Impact Tests

Availability:
  • Contact Us
Short Description
  • An applied force creates an indentation into the surface with a load determined by a calibrated expendable shear pin, which breaks at 1580 kgF (15.500N). The diameter of the resulting indentation is measured by means of a conventional Brinell Scope.

Get a quote

Product Brochure
  • Please contact us to request a quote or further information
  • Contact Us
Product Overview
  • The accuracy and consistency of the STE hardness tester are due to the original principle of the loading system. The applied force causes the penetration of the indenter into the surface with a force determined by a calibrated expendable shear pin, which shears at 1580 kgF (15.500N). The diameter of the resulting indentation is measured by means of a conventional Brinell scope.

    With the calibrated pin system only one reading of the indentation is necessary, error possibilities are cut by 50% compared to the impact bar system.

    The comparison errors are eliminated and the resulting accuracy is comparable to the bench hardness testers. The ERNST STE is the most widely used system in Brinell hardness testing. ISO 6506.

Specification
  • Working principle

    • Ernst patented Calibrated Pins System

    Load application method

    • Static load (STE/A with clamp); dynamic load (with hammer)

    Loads

    • 1580kp (15500N)

    Standard scales

    • HB30 - N/mm - kg/mm on reading chart

    Minimum measurable diameter

    • 30mm without surface preparation

    Reading

    • on ERNST hardness charts

    Objective lenses

    • Standard: 8x eyepice. Optional: 20X hilight Brinell scope; E-BRIO Brinell Optical Reader

    Working conditions

    • -20C +50C

    Dimensions

    • 40cm x 23cm x 8cm

    Storage

    • With the E-BRIO Brinell Optical Reader the indentations can be stored, printed and used for statistics.
    • Working area dimensions

      • min. 10mm x 10mm

      Weight

      • 6,700kg

      Standard Accessories

      • Package of 250 calibrated pins
      • 8x eyepiece
      • Ernst hardness test block
      • Wooden case for STE/A
      • Cylinder for impact testing
      • V-anvil 40 mm dia.
      • Flat anvil 20 mm dia.
      • Flat anvil 40 mm dia.
      • Steel penetrator
      • Hardness conversion chart and operating instructions
Application
  • Aeronautics
  • Automotive
  • Defence
  • Oil and Gas
  • Railway
Product Brochure

Sign up to our newsletter

Keep up to date with company news, product launches and industry news.

Sign up