PLD - Pulsed Laser Deposition & Thermal Evaporator System
Versatile Pulsed Laser Deposition and Thermal Evaporator system PLD–T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and so Thermal Evaporation technique. It can deposit complex materials and crystalline structures onto substrates with very little setup involved.Pulsed Laser Deposition technique leads to efficient none-thermal ablation and preserves the stoichiometry of the target materials. By applying this method it could deposit materials such as nitrides oxides super lattices polymers composites.
Vac Coat Limited is a designer and manufacturer of high-quality tailor-made Physical Vapour Deposition (PVD) and Vacuum Coating Systems with excellent customer care and after sale services. Equipped with more than 25 years’ experience in the vacuum and Thin Film deposition technologies. Their research and development team supported by academic scientists and qualified engineers are highly active to develop new designs and meet special inquiries received from clients. Designed and manufactured components by Vac Coat's engineering team meets high-quality standards. Their vacuum coating systems have been sold to many universities and research centers through distributors worldwide with very good references and feedback.
- Target manipulator with adjustable rotation speed
- 3 thermal sources and special feedthrough
- Quartz crystal monitoring system for real time thickness measurement(1 nm precision)
- Intuitive touch screen to control the coating process and rapid data input
- User friendly software that can be updated via network
- Equipped with rotary sample holder
- Equipped with electronic shutter
- Equipped to motorized boat selection
- 500 °C substrate heater
- Two-year warranty
Thermal Evaporation Sources(Boat/Basket/Coil)
The PLD-T, Pulsed Laser Deposition System, can be fitted with three independent heat resistance thermal evaporation sources. The good design of the evaporation source holder causes no contamination transfer from sources materials to other materials. The length of source holders can be adjusted in the range of 5~10 cm which meets the costumer requirement.
Target Manipulator of Pulsed Laser Deposition System
PLD–T is equipped with a multi-target manipulator which includes three target with diameter of 2cm. Targets are in standard size and all of our target manipulators are motorized and includes target rotation.
Touch Screen Control with Colorful Display
The pulsed laser deposition system, PLD-T, is equipped with a 7” colored touch screen and fully automatic control and data input that can be operated by even inexperienced users. The vacuum, current and deposition information can be observed as digital data or curves on the touchscreen. Information of the last 300 coatings can be saved in the history page.
DTT - Desk Thermal Evaporator
DST3-S - Sputter Only – Straight Cathodes
DST3-TA - Sputter + Thermal Evaporation – Angled Cathodes
DST3-TS - Sputter + Thermal Evaporation – Straight Cathodes
DST2-A - Lower Priced 2 head Sputter Only System
|Pump||High vacuum turbo pump|
|Pumping Speed||90 l/s 350 l/s|
|Ultimate Pressure||7 x10-6 Torr 7×10-7 Torr|
|Backing Pump||Diaphragm backing pump|
|Gauge||Full range vacuum measuring gauge|
|Power Supply||5 KW high current power supply|
|Flow Meter||Precision Mass Flow meter(MFC)|
|Graphs||Able to record and plot coating parameters graphs|
|Transfer||Transfers the curves and deposition process data by USB port to PC|
|Utilities||220V-240V, 50/60HZ, 16A|
|Box Dimensions||50 cm H x 60 cm W x 47 cm D|
|Shipping weight||70 kg|
If you would like to learn more about the PLD - Pulsed Laser Deposition & Thermal Evaporator System, contact our experienced technical team today. We would be happy to help you find the right profilometry solution for your needs. Contact us today!